Cationic CPAM Hpam Npam PAM Anionic Polyacrylamide Non-Ionic Polyacrylamide

• Customization: Available
• Certification: CCIC, REACH
• Environmental Protection: Yes
• Model NO.: CPAM
• Appearance: Powder
• Kind: Wax Cleaning Agent
• Application: Lubricant Additives, Fuel Additives, Composite Additive, Paraffin Additive, Asphalt Additives, Waste Oil And Crude Oil Additives
• Melting Point: 1750ºC
• Sample: Sample Could Be Provided
• Supply Ability: 3000 Ton/Tons Per Month Abrasive Grit
• Poriness: 43%
• 1: Anionic Polyacrylamide
• 2: Cationic Polyacrylamide
• 3: Non-Ionic Polyacrylamide
• Transport Package: Customized According to Customer Needs
• Specification: 99.9%
• Trademark: Orcel
• Origin: China
• Production Capacity: 500000

Product Description

 

 

Product Description

 
Description
This product is an environmental friendly chemical .It's not soluble in most organic solvents, with good flocculating activity, and can reduce the friction resistance between liquid. It has two different forms, powder and emulsion.

Application Field
1. It is mainly used for the sludge dewatering and decrease the rate of water content of sludge.
2. It can be used to treat industrial wastewater and life sewage water. 
3. It can be used for paper making to improve dry and wet strength of paper and to improve dry and wet strength of paper and to increase the reservation of tiny fibers and fillings.


Advantage
1. Easy to dissolve, dissolve time 40min
2. High efficiency
3. High molecular, molecular weight 10million
4. High purity, without impurity

Specifications

Item	Cationic Polyacrylamide
Appearance	White Fine-Sand Shaped Powder	Milky White Emulsion
Molecular Weight	6million-10million	/
Ionicity	5-80	5-55
Viscosity%	/	4.5-7
Degree of Hydrolysis%	/	/
Solid Content%	≥90	35-40
Shelf Life	12 Months	6 Months
Note: Our product can be made upon your special request.

Application Method
Powder
1. It should be diluted to the concentration of 0.1%(based on solid content).It is better to use neutral or desalted water.
2. When making up solution, the product should be scattered evenly in the stirring water, usually the temperature is between 50-60ºC. 
3. The most economical dosage is based on the trial.

Emulsion
When diluting the emulsion in water, it is supposed to stir quickly to make the polymer hydrogel in the emulsion sufficiently contact with water and rapidly disperse in water. The dissolution time is around 3-15 minutes.

Package and Storage
Powder
Package: The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.
Storage: Should be sealed and stored in a dry and cool place below 35ºC.

Emulsion
Package: 25L, 200L, 1000L plastic drum.
Storage: The storage temperature of the emulsion is perfectly between 0-35ºC. The general emulsion is stored for 6 months. When the storage time is long, there will be a layer of oil deposited on the upper layer of the emulsion and it is normal. At this time, the oil phase should be returned to the emulsion by mechanical agitation, pump circulation, or nitrogen agitation. The performance of the emulsion will not be affected. The emulsion freezes at a lower temperature than water. The frozen emulsion can be used after it is melted, and its performance will not change significantly. However, it may be necessary to add some anti-phase surfactant to the water when it is diluted with water.

Specifications:

Item/Type	Appearance	Molecular weight(ten thousand)	Solid content%	Degree of ion or hydrolysis%	Residual monomer
anionic	White granules or powders	300-2200	≥88	degree of hydrolysis 10-35	≤0.1
cationold	White granules or powders	500-1200	≥88	ionic 5-60	≤0.1
nonionic	White granules or powders	200-1500	≥88	degree of hydrolysis 0-5	≤0.1
zwitterionic	White granules or powders	500-1200	≥88	ionic 5-50	≤0.1

Superfloc specification:

Product	Apperance	Molecular Weight	Ionic Charge
Anionic Polyacrylamide	Powder	5-22 Million	5%-40%
Cationic Polyacrylamide	Powder	5-12 Million	5%-60%
Non-ionic Polyacrylamide	Powder	5-15 Million	0%-5%

Application introduction of polyacrylamide:
1.For flocculation, PAM can be used for recovering solid substance treating industrial effluent, domestic sewage and purifying water, assisting filtering, treatment oc coal, mining, and well drilling slurry material and etc.
2.For viscosity thicker, PAM can be used for oil/gas drilling additives and water injection process in EOR(Enhanced Oil Recover).
3.For paper mills, polyacrylamide can be used for enhance staying rate of filling material, speed size filterability and white water sedimentation in the paper and then coagulate to increase the strength of paper.
4.PAM can also be used in textile industries.

Packaging & Shipping

 

OUR CERTIFICATIONS

 

ABOUT US

Hebei Orcel Trade Co. Ltd

Hebei Orcel Trade Co, Ltd, is a leading manufacturer and professional exporterof various chemicals. Our headquarter is in mainland China. We are a professional supplier of industrial chemicals in China. We have developed and establishedgood business relationships with world-renowned clients. It is one of the comnies with early production and large scale, and its product quality and technology have reached the standard, And repeatedly won the honor of productuality. Its products are sold well all over the country and exported to more that20 countries and regions such as Southeast Asia, Europe, America and Africahas a high popularity and reputation and has become a well-known brand inChinas titanium dioxide industry. The company adheres to the business philosophy of"pursuing quality and creating world brand. It takes service as the basis,quality as the survival, science and technology as the development. It adheres tothe philosophy that products make users sigh, prices surprise users, and servicesmove users. It makes every user feel that Orcel" products are reassuring! In thefuture development, Hebei Orcel Trade Co, LTD, Ltd will always adhere to thenovation"business philosophy, realize sustainable operation, and make constant progress on the road of internationalization.

Our factory

FAQ

Q1: What's your MOQ?

A:MOQ is 1KG.

Q2:How about delivery leadtime?
A:Delivery lead time: About 3-5 days after payment confirmed. (Chinese holiday not included)

Q3: Is there a discount?
A:Different quantity has different discount.

Q4:How to start orders or make payments?
A:Proforma invoice will be sent first after confirmation of order, enclosed our bank information. Payment by T/T, Western Union .

Q5: How do you treat quality complaint?
A:First of all, our quality control will reduce the quality problem to near zero. If there is a real quality problem caused by us, we will send you free goods for replacement or refund your loss.

Q6. We don't know you at all, how can we trust you?
A: You are always warm welcomed to visit us at any time.Before we start B2B, MIC has audited our company on-spot and approved our credit.Commitment is the No.1 Point of our Enterprise's Value.

Q7.Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery,International Authorized Third-Party Test for the products if you need are highly welcomed.